the tool needed
the test fit
the cut line
the mistake cut on the driver door
how the door lock is held in place
window locked in place; it is either up or down nothing in the middle.
to protect from cutting myself
Total weight loss was a bit over 20 pounds per door, the Plexi-glass cost $20 per door; 40 pounds for $40, pretty frikken awesome. To top it all off I can finally lock the passenger side door!
Along with the weight reduction I also installed the Techno Toy Tunning Rear lower control arms; for toe and camber adjustment. On a side not I did ask for gunmetal, but they sent me black ::sad face::
The old ones
Since the car is on the ground I also took some shots of the front steering geometry; just a hair over parallel!
Cut the front fender bolt to give myself a bit more tyre clearance.
The front was lowered a 1/2 inch, and in reality anything lower would cause too much rubbing so for now i am satisfied with how low it is.
For the rest of the photos head HERE
-till next time